ZNX Series evaporative condenser could be installed in middle- or large- size refrigeration equipment, and it could be found in various industries, including petrochemical, light industry, chemical, refrigeration industry, air conditioning industry, food refrigeration industry and etc.
Technical parametersModel | Axial fan | Circulator pump | Water supplement amount (m3/h) |
Water supplement pressure (MPa) | Design condition | Design heat flow rate (kW) |
||||||
Power (kW) |
Air flow (104m3/h) | Number | Power (kW) | Number | Flow rate (m3/h) | Temperature (℃) | Design pressure (MPa) | |||||
DBT | WBT | |||||||||||
0.75 | 2.4 | 2 | 1.1 | 1 | 40 | 0.20~0.73 | ≥0.25 | 35 | 24 | 2.0 | 240 | |
1.5 | 3.6 | 2 | 1.5 | 50 | 0.30~1.06 | 350 | ||||||
3.0 | 4.5 | 1 | 1.5 | 75 | 0.39~1.37 | 450 | ||||||
4.0 | 6.0 | 1 | 1.5 | 75 | 0.52~1.83 | 600 | ||||||
3.0 | 7.6 | 2 | 2.2 | 100 | 0.64~2.29 | 750 | ||||||
3.0 | 9.0 | 2 | 4 | 120 | 0.77~2.74 | 900 | ||||||
3.0 | 10.0 | 2 | 4 | 160 | 0.86~3.05 | 1000 | ||||||
4.0 | 12.0 | 2 | 4 | 160 | 1.02~3.65 | 1200 | ||||||
5.5 | 15.0 | 2 | 5.5 | 195 | 1.27~4.56 | 1500 | ||||||
5.5 | 18.0 | 2 | 7.5 | 260 | 1.54~5.48 | 1800 | ||||||
7.5 | 20.0 | 2 | 7.5 | 260 | 1.70~6.08 | 2000 | ||||||
7.5 | 24.0 | 2 | 11 | 310 | 1.72~6.10 | 2400 | ||||||
11 | 28.0 | 2 | 15 | 360 | 2.0~7.3 | 3000 | ||||||
7.5 | 33.0 | 3 | 15 | 450 | 3.0~7.6 | 3600 | ||||||
7.5+5.5 | 38.0 | 2+2 | 7.5 | 2 | 520 | 3.24~12.02 | 3800 | |||||
7.5 | 48.0 | 4 | 11 | 2 | 620 | 3.44~12.2 | 4800 | |||||
11+7.5 | 52.0 | 2+2 | 15+11 | 2 | 670 | 3.72~13.4 | 5400 | |||||
11 | 56.0 | 4 | 15 | 2 | 720 | 4.0~14.6 | 6000 | |||||
7.5 | 66.0 | 6 | 15 | 2 | 900 | 6.0~15.2 | 7200 | |||||
7.5+5.5 | 78.0 | 4+4 | 7.5 | 4 | 1040 | 6.48~24.04 | 7600 | |||||
7.5 | 80.0 | 8 | 7.5 | 4 | 1040 | 6.8~24.32 | 8000 | |||||
7.5 | 96.0 | 8 | 11 | 4 | 1240 | 6.88~24.4 | 9600 | |||||
11 | 112.0 | 8 | 15 | 4 | 1440 | 8.0~29.2 | 12000 | |||||
7.5 | 132.0 | 12 | 15 | 4 | 1800 | 12.0~30.4 | 14400 |
Notes
1. Lowest water level of remote sump tank should be 0.3m higher than the height of water pump's suction port during the operation.
2. Increasing the head for water pump: Head's increasing is carried out for a uniform water spraying. And its design increase is calculated based on the min. pressure and fluid resistance loss.
3. Above parameters may be changed without further notice.